Skip to main content
Belterra area

Stained Concrete Floors in Belterra, TX

We hear about stained concrete floors in Belterra from owners of houses and custom homes, and from nearby Bear Creek and Dripping Springs too. Belterra is a planned community of about 1,600 acres in Hays County, off US 290 W about 18 miles southwest of downtown Austin. Garage coatings and patio resurfacing come up in those calls as well. We work out of Austin and have served the city since 2001. We check each Belterra job against our calendar before we book it.

We don't have an office out on 290, so ask us about timing before you plan around a date.

  • Serving Austin since 2001
  • Decorative concrete specialists, not a general remodeler
  • Seven confirmed service lines
  • Published editorial standards and technical review
Why us

How Our Crew Works in Belterra

  • Decorative concrete is our whole trade, not a sideline of a remodeling business
  • We've served the region since 2001, and we match the prep to each slab southwest of the city, the same as in town
  • We tell you whether your slab will take stain well before you commit to a color or finish
  • We break down what drives the cost: square footage, removal, prep, repairs, and sealer
  • Our published standards spell out what we will and won't claim

How We Get to Belterra and When We Can Start

Belterra sits on the south side of US 290 W, between Sawyer Ranch Road and Nutty Brown Road. We usually come out that way from central Austin. Sawyer Ranch and Nutty Brown both lead in from US 290, and the Belterra Village shops sit at the Nutty Brown corner. The stain, the sealer, and any grinding or dust control gear the job calls for all come with the crew. We normally load everything back on the trailer at the end of each day. If something has to stay on site, we'll talk with you about it ahead of time.

We don't commit to a set response time for Belterra jobs. Our bookings, the size of your slab, and the number of trips out 290 the job needs all set the timing. Room measurements and a few photos let us give you an estimated date range from our calendar. Weather, material availability, and site conditions can move that range.

Access plays into your quote. Is there room for the trailer in the driveway, and power we can plug into? Stairs matter too, and so does keeping the room empty until everything dries and cures.

Getting Belterra Slabs Ready for Stain

Most homes in Belterra were built after 2000 on slabs poured at ground level. Slabs that new are often flatter than older Austin floors and carry fewer patches, which works in your favor. But newer slabs bring their own trouble. Some still have leftover curing compound (a coating builders spray on as the concrete sets). Many were machine troweled so smooth and tight that they don't soak up much. And most garage floors haven't been ground down to take an epoxy or polyaspartic (a fast curing coating) finish.

On a Belterra slab that tight, acid stain behaves differently than it does on an older, more open slab. Water based stains and polished finishes react differently on these floors too. That's one reason we test a small area before we agree on a color, instead of quoting a finish off a photo.

Back patios around Belterra take hard afternoon sun, so we lean toward lighter colors, UV stable acrylic sealers, and textures with more grip underfoot. Nothing makes a wet patio fully slip proof, so put mats at the doors where people come in from outside. Two patios on the same street can need different prep. So we look at each one.

Why we take jobs out in Belterra

Belterra's newer homes bring us requests for garage floor coatings and decorative concrete. We take those jobs case by case.

Real projects

See our concrete projects

Browse our finished jobs and read what each one took. When a finish catches your eye, ask us what would be different on a Belterra slab.

Questions

Questions we hear from Belterra

Do you cover Belterra for decorative concrete work?
We take Belterra jobs one at a time. Send the address, the rough square footage, and a few photos of the slab, and we'll confirm coverage along with an estimated start date. We take jobs case by case in Oak Hill, Bear Creek, Manchaca, Dripping Springs, and Driftwood too.
Do you have an office or crew based in Belterra?
No. We're a decorative concrete company based in Austin, and we drive out US 290 W to jobs here. We won't claim an office or a depot out here that we don't have.
How fast can you start a Belterra project?
Our bookings and the size of the job decide that. Lots of prep, tile or carpet removal, and sealers that take several coats all move the start date back. We quote an estimated date range, not a sales pitch about speed. That range can change with weather, material availability, and site conditions.
Which decorative concrete services are available in Belterra?
All seven services we offer in Austin are available in Belterra. That list covers stained concrete floors, polished concrete, epoxy and metallic epoxy coatings, overlays and microtoppings, patio resurfacing, countertop resurfacing, and floor restoration. Each job typically opens with checking and prepping the slab, and most close with a sealer.
Do garage slabs in newer Belterra homes need different prep?
Your slab sets the prep, not the subdivision. If it needs grinding, we use diamond tooling to give the coating a surface to grip. Moisture testing depends on the slab and the coating system, and your proposal will say whether we do it. A newer garage slab in Hays County can hold enough moisture to lift a coating if no one tests it first.
How much does concrete staining cost in Belterra?
The slab's condition, the square footage, any old flooring that has to come up, and the finish you choose all set the price. Staining the slab you already have usually costs less per square foot than new tile or hardwood, since the floor underneath is already there. Your quote typically breaks out the main costs, so you can compare it line by line.
What are the downsides of staining concrete?
Stain puts everything in the slab on display. Cracks, patches, and old glue all end up in the finished floor. How much stain each spot soaks up changes the color, and the floor is hard underfoot. We cover these tradeoffs when we look at your slab, so nothing catches you off guard.
Is stained concrete a good option for newer Belterra homes?
Most homes in Belterra were built after 2000 on a slab at ground level. With the sealer kept up, stained concrete typically holds up well on those slabs, and it suits open living areas. How it turns out comes down to your slab's condition, so we test a small area before we settle on a color.

Still deciding?

Send a couple of photos along with the room size and what's on the floor today. Before you commit to anything, we'll tell you what the slab calls for.

Get My Free Stained Concrete Quote

Planning a decorative concrete job in Belterra?

Send the Belterra address, the square footage, and a note on what's on the floor. We'll let you know whether it fits our calendar and what prep it needs.

  • We check your slab before we recommend a color
  • What sets the cost, spelled out in writing
  • Serving Austin since 2001

Plan your project in this area

Tell us your ZIP code, what's on the floor now, and when you'd like it done, so we can confirm coverage and access. Photos of the slab tell us far more than the street name does.