Skip to main content
Blackhawk area

Stained Concrete Floors for Blackhawk Homes in Pflugerville

We field questions about stained concrete floors in Blackhawk, a golf course community in Pflugerville near where SH 130 meets SH 45 in Travis County. Owners there ask about garage floor coatings and patio resurfacing too, and so do their neighbors in Falcon Pointe, Avalon, and Villages of Hidden Lake. We take those stain, coating, and resurfacing jobs case by case. We work out of Austin and have served the region since 2001. If your garage hasn't been ground or tested for moisture, we'll tell you whether it needs that.

We haven't made Blackhawk a regular stop yet, so check coverage and timing with us before you book.

  • Serving Austin since 2001
  • Decorative concrete specialists, not a general remodeler
  • Seven confirmed service lines
  • Published editorial standards and technical review
Why us

What You Can Expect From Our Crew

  • Decorative concrete is our whole trade, not a sideline of a remodeling business
  • We've served the region since 2001, and we match the prep to each slab on northeast Austin jobs
  • A clear read on whether your slab can take stain before you pick a color or finish
  • What drives the cost, broken out: square footage, removal, prep, repairs, and sealer
  • Our claims follow standards anyone can read on our site

How We Get to Blackhawk and When We Can Start

Blackhawk sits in Pflugerville in Travis County, northeast of Austin. SH 130 runs north and south past it and meets SH 45 close by. Those two toll roads give us an easy way up from Austin. From there, Kelly Lane is the main road into Blackhawk, and it runs right through Falcon Pointe too. Our crew brings the stain, the sealer, and any grinding or dust control gear the job calls for. At the end of the day, our equipment typically goes home with us. Before we leave anything on site, we'll check with you.

We don't set a fixed response time for Blackhawk jobs. How soon we come depends on our bookings, the size of your slab, and how many trips up SH 130 the job takes. Send the room sizes and a few photos, and we'll send back an estimated date range from our calendar. Weather, material availability, or site conditions can shift those dates.

Getting in and out of your house matters for the price. We check whether the trailer fits in the driveway, whether there's power, and whether stairs are the only way in. And the room has to stay empty until everything cures.

What Changes How Stain Turns Out in Blackhawk

Blackhawk has been building out since the 1990s, and its houses sit on slabs poured at ground level. Even the older slabs can have the same quirks we see in newer homes around Pflugerville. Some still have leftover curing compound, a coating builders spray on as the concrete sets, on floors that weren't meant to be left bare. Many were machine troweled so smooth and tight that they soak up less than older Austin slabs. And most garage floors there haven't been ground down with diamonds to take an epoxy or polyaspartic coating.

Why does that matter for color? In Blackhawk, a tight slab that soaks up little will take acid stain differently than an older, more open one. Acid stains react with the concrete and leave a mottled, see through color. Water based stains go on more evenly and come in more colors. Polishing acts differently again on these tight floors. That's why we test a small area before we agree on a color, and we won't quote a finish off a photo.

Back patios in Pflugerville take a lot of afternoon sun. On a sunny patio, we'd pick a lighter color, a UV stable outdoor sealer, and a texture with more grip underfoot. A wet surface can't be made fully slip proof, so lay mats where people come in from the yard. Two houses on the same Blackhawk street can take stain in different ways. So we look at your slab on its own.

What brings us to Blackhawk

We get requests from Blackhawk's slab homes for garage coatings and decorative concrete, and we take those jobs case by case. We don't claim a local office.

Real projects

See our concrete projects

Scroll through our project photos and the work behind each floor. When one comes close to what you want, ask us what would come out different on your slab.

Questions

Questions we hear from Blackhawk

Do you cover Blackhawk for decorative concrete work?
Blackhawk is on our list of possible coverage areas. Send us the address, the rough square footage, and a few photos of the slab, and we'll confirm coverage and scheduling for that job. We get requests from Pflugerville, Wells Branch, Heatherwilde, Manor, Colony Park, and Falcon Pointe too, and we take those jobs case by case.
Do you have an office or crew based in Pflugerville?
No. We're a decorative concrete company based in Austin, and we take SH 130 and SH 45 to jobs here. We won't claim an office or depot out here that we don't have.
How fast can you start a project in Blackhawk?
How full our calendar is and how big your job is decide that. Heavy prep, tile or carpet removal, or a sealer that needs several coats will each push your start date out. Your quote gives an estimated range of dates, with no sales talk about how quickly we'll show up. Those dates can change with weather, material availability, and site conditions.
Which decorative concrete services are available in Blackhawk?
All seven of our Austin services come to Blackhawk: concrete staining, polished concrete, epoxy and metallic epoxy coatings, overlays and microtoppings, patio resurfacing, countertop resurfacing, and floor restoration. A job typically begins with checking and prepping the slab, and most wrap up with a sealer.
Do garage slabs in newer Pflugerville homes need different prep?
We prep for the slab in front of us, not for the neighborhood. If it calls for grinding, diamond tooling roughs it up so the coating can hold on. Your proposal will spell out whether we moisture test, since that depends on the slab and the coating system. A newer Pflugerville garage slab can hold enough moisture to lift a coating. Before epoxy goes down, ask whether the slab will be ground and tested.
How much does it cost to stain a concrete floor in Blackhawk?
What you pay depends on the slab's condition, the total square footage, whether old flooring has to come up, and the finish you pick. Since the slab is already in your Blackhawk house, staining it usually costs less per square foot than new tile or hardwood. With photos and measurements, we can price your job from what we see.
What are the downsides of staining concrete?
Stain can't cover anything up. Cracks, patches, and leftover glue in the slab show through in the finished floor. The color shifts with how much stain the concrete takes in, and the floor is hard underfoot. We point out these downsides when we look at your slab, so you know what you'll end up with.
Is stained concrete a good option for Blackhawk homes?
Blackhawk homes sit on slabs poured at ground level, which is what stain needs. With the sealer kept up, decorative concrete typically holds up well on those slabs, and it suits open living areas. How it turns out comes down to your slab, so we test a small area before we settle on a color.
What are the downsides of polished concrete floors?
Polished concrete is hard underfoot like any bare slab. The grinding kicks up a lot of dust too. Dust control depends on the job and the space, and your proposal will say. When we look at your slab, we'll talk through whether polishing or staining makes more sense.

Still deciding?

Give us the room size, tell us what covers the floor now, and send a couple of photos. We'll say what the slab needs before you agree to anything.

Get My Free Stained Concrete Quote

Other areas we serve

Whisper Valley, Austin, TX

We serve Whisper Valley, a planned community of new homes in east Austin. It sits along the FM 973 corridor in Travis County, near Lake Walter E. Long and the SH 130 toll road. Homes there and in nearby Colony Park and Manor are built on slabs at ground level. Their owners ask for stained concrete floors, garage floor coatings, and patio resurfacing. We've served Austin since 2001, and we confirm Whisper Valley coverage for each job.

View coverage details

Easton Park, Austin, TX

Easton Park is a large planned community in southeast Austin, about 12 miles from downtown. It sits off William Cannon Drive and McKinney Falls Parkway in Travis County, near McKinney Falls State Park. New homes in Bryant Park, Knob Hill, Union Park, and Skyline Park, plus townhomes in Nelson Village, bring requests for stained floors and garage coatings. We work from Austin, we've served the city since 2001, and we confirm Easton Park coverage job by job.

View coverage details

Mueller, Austin, TX

Mueller is a planned Austin neighborhood of 700 acres built on the old Robert Mueller Municipal Airport site. It sits in central east Austin along Airport Boulevard in Travis County. Mueller's houses, townhomes, and condos have gone up since 2007 on slabs at ground level. Near Mueller Lake Park, Aldrich Street, Windsor Park, and Cherrywood, owners ask for stained concrete floors, polished concrete, garage coatings, and patio resurfacing. We've served Austin since 2001, and we confirm Mueller coverage and scheduling for each job.

View coverage details

Planning a decorative concrete job in Blackhawk?

Tell us the address, the size of the floor, and what covers it now. We'll check our schedule and tell you what prep the floor calls for.

  • We check whether your slab suits stain before we recommend a color
  • What drives the cost, explained in writing
  • Serving Austin since 2001

Plan your project in this area

Tell us your ZIP code, how the floor looks now, and when you'd like it done. We'll confirm coverage and tell you plainly what we see.